Final testing for Lithium Australia's LFP cathode material
Released
Released
Announcement PDF
22 September 2023
Final testing for Lithium Australia’s LFP cathode
material confirms high quality product
HIGHLIGHTS
◼
Lithium Australia’s lithium ferro phosphate (LFP) cathode material matches, or
exceeds leading competitor products based on final independent testing by
NOVONIX Battery Technology Solutions
o Retained the highest capacity at fast charging rates and demonstrated
superior stability compared to market leading samples
o Performed in line with competitors during high temperature testing and
retained an equivalent expected cycle life
◼
The positive results highlight the longevity of the product, while also confirming
it as a strong use case in hot climate markets such as India and Southeast Asia
◼
Lithium Australia is leveraging the strong results to showcase its capability as
an attractive alternative to existing LFP cathode material manufacturers
concentrated in China
◼
The Company looks forward to continuing its ongoing commercial negotiations
with a validated high quality product
Lithium Australia Ltd (ASX:LIT) (“Lithium Australia” or the “Company”) is pleased to
announce that the independent testing of its LFP cathode material confirmed the product
to be of a high quality, either matching or exceeding the competitor set across capacity,
stability, and high temperature performance. Testing was completed by a leading expert
in battery materials research and development services, NOVONIX Battery Technology
Solutions Inc., a wholly owned subsidiary of NOVONIX Limited (ASX: NVX, NASDAQ:
NVX). The final testing results follow the preliminary results released in April 20231 which
assessed the Lithium Australia LFP against two leading commercial brands.
The results showed that Lithium Australia’s LFP either matched or exceeded competitor
product across all testing parameters:
•
Retained the highest capacity at fast charging rates when compared to market
leaders.
•
Proven to be the most stable out of all tested samples, highlighting the product’s
safety and suitability for commercial grade energy cell design.
1 Refer to ASX announcement, VSPC cathode material independently tested, 13 April 2023
Lithium Australia Limited
ACN: 126 129 413
ASX: LIT
Registered Office:
Suite 16 & 17, 79-83 High Street, Kew, Victoria 3101, Australia
P: (03) 7017 2656
E: info@lithium-au.com
W: lithium-au.com
`
•
Cycle life performed in line with market leading products in both ambient (22°C)
and high temperature (40°C) environments, highlighting the product’s resilient
characteristics and suitability for hot climate markets such as India.
The positive results from the independent testing highlights Lithium Australia’s LFP
product as being an attractive alternative to existing LFP supply which is heavily
concentrated in China. This provides customers with a more diverse supply chain, derisking potential political disruptions and over-reliance on a particular geography.
The Company is currently engaged in discussions with multiple parties across North
America, Europe, India, South Korea, and Japan regarding potential partnerships for LFP
offtake and development, and validation of its product serves as a strong negotiation tool.
Comment from Lithium Australia CEO & Managing Director, Simon Linge
“We are excited to receive such strong results for our LFP cathode material, validating
our technology and proprietary production process. These results highlight how our
product’s performance can match or exceed the market leading competitors. We believe
this important validation will help us to continue accelerating our ongoing commercial
negotiations, seeking offtake agreements and potential partnerships. Ultimately, we
remain steadfast on achieving large-scale commercialisation of our battery materials
manufacturing capabilities.”
Test Work Program
Testing battery materials to get meaningful results for cell lifetimes and the rate of cell
degradation can be a time-consuming process, involving charge/discharge cycling of test
cells over thousands of cycles. However, this data is vital to assess the quality of a
cathode like LFP that is valued for its long cycle life and slow rates of degradation.
Lithium Australia’s LFP has been tested by NOVONIX using their cell prototyping line and
Ultra High Precision Coulometry (‘UHPC’) equipment, which allows highly accurate
measurements of the electrochemical processes in a cell in short periods of time. This
enables non-destructive testing of how battery chemistry is changing from cycle to cycle.
UHPC allows for rapid selection of materials for favourable electrochemical properties,
which correlate to long lifetime. In addition to UHPC testing, complementary cycle life
testing was completed successfully. Lithium Australia’s Energy LFP product and two
commercial LFP products were tested with two different synthetic graphite counter
electrodes, one from NOVONIX and a second from a leading tier 1 Chinese supplier.
1.0Ah stacked pouch cells were made from the six combinations of materials and a
common benchmark electrolyte system. UHPC testing was performed at a slow current
rate of C/10 for both charge and discharge (10 hour charge/discharge) at 40°C for 24
cycles. Cycle aging was performed at a C/3 charge and discharge (3 hour
charge/discharge) at 22°C and 40°C.
ASX ANNOUNCEMENTS Lithium Australia
lithium-au.com
Page 2
`
Test Results
Independent testing concluded that all LFP-Graphite combinations tested show good
capacity retention in UHPC and long-term cycling at 22°C and 40°C. Therefore, this
material combination is a good choice for a long lifetime battery design and application.
The final results of this study were in line with initial results announced on 13 April 2023
and support the high stability of Lithium Australia LFP demonstrated by UHPC and cycle
aging. Cells with Lithium Australia LFP showed the lowest rate of capacity fade during
UHPC testing and the highest electrochemical stability of the three LFP materials tested.
Cells with Lithium Australia LFP and NOVONIX graphite demonstrated the strongest
performance of all material combinations. Lithium Australia LFP performed similarly to
the other two commercial cathodes during cycle aging testing over the 1,000 cycles
trends and support +4,000 cycle life for Lithium Australia LFP product (at ambient
temperatures). Cells with Lithium Australia LFP and NOVONIX graphite have retained
about 95.3% of their initial capacity after 1,000 cycles at 22°C, compared to 91.3% for
Lithium Australia LFP with Graphite #2.
Authorised for release by the Managing Director / CEO of the Company.
Simon Linge
Managing Director / CEO
Mobile +61 (0) 438 721 280
simon.linge@lithium-au.com
Stuart Tarrant
Chief Financial Officer
Mobile +61 (0) 467 817 005
stuart.tarrant@lithium-au.com
Forward-looking statements
This announcement contains forward-looking statements. Forward-looking statements
are subject to a variety of risks and uncertainties that it is beyond the Company’s ability
to control or predict and which could cause actual events or results to differ materially
from those anticipated in such forward-looking statements.
About Lithium Australia
Lithium Australia is aiming to lead and enable the global transition to sustainable lithium
production. The Company operates Australia’s market leading lithium-ion battery
recycler, develops leading-edge processing technology to produce lithium ferro
phosphate (LFP), and develops patented lithium extraction technology. Lithium
Australia’s revenue-generating recycling business and technologies are well-placed to
capitalise on growing global lithium-ion battery demand and provides diversification
benefits to global supply chains.
About NOVONIX
NOVONIX is a leading battery technology company revolutionising the global lithium-ion
battery industry with innovative, sustainable technologies, high-performance materials,
and more efficient production methods. The company manufactures industry-leading
battery cell testing equipment, is growing its high-performance synthetic graphite anode
material manufacturing operations, and has developed an all-dry, zero-waste cathode
ASX ANNOUNCEMENTS Lithium Australia
lithium-au.com
Page 3
`
synthesis process. Through advanced R&D capabilities, proprietary technology, and
strategic partnerships, NOVONIX has gained a prominent position in the electric vehicle
and energy storage systems battery industry and is powering a cleaner energy future. To
learn more about NOVONIX visit them on www.novonixgroup.com, LinkedIn and Twitter.
ASX ANNOUNCEMENTS Lithium Australia
lithium-au.com
Page 4
Share your feedback
Discover